1st Pulsed CV measurement (Data)

Continued the experiment left from last time, the oscilloscope is changed and the data can be saved into pan driver. 

The setting file of the measurement is shown below:

Anlg Ch State  Units/Div  Position  Coupling  BW Limit  Invert  Impedance 
 Ch 1:    On     3.13V/     0.0V       DC        Off      Off     1M Ohm  
 Ch 2:    On     13mV/      0.0V       DC        Off      Off     1M Ohm  

Anlg Ch   Probe  
 Ch 1:  1.00 : 1 
 Ch 2:  1.00 : 1 

Trigger  Mode   Coupling  Noise Rej  HF Reject  Holdoff 
  Edge  Normal     DC        Off        Off       60ns  

Trigger Source   Slope   Level 
  Edge   Ch 1   Either  +500mV 

 Time  Zoom  Time Ref  Main s/div   Delay  
Normal  Off   Center    100.0us/   100.0us 

Acquisition Realtime  Vectors  Inf Persist 
  High Res     On        On        Off     

Segmented Current Seg  Actual # Segs  Requested # Segs  Sample Rate 
    On         1             19              19           100MSa/s  

The data from channel 1 which is voltage in is recorded in a  .csv file, please click here.
The data from channel 2 which is voltage out is recorded in a .csv file, please click here.