Continued the experiment left from last time, the oscilloscope is changed and the data can be saved into pan driver.
The setting file of the measurement is shown below:
Anlg Ch State Units/Div Position Coupling BW Limit Invert Impedance
Ch 1: On 3.13V/ 0.0V DC Off Off 1M Ohm
Ch 2: On 13mV/ 0.0V DC Off Off 1M Ohm
Anlg Ch Probe
Ch 1: 1.00 : 1
Ch 2: 1.00 : 1
Trigger Mode Coupling Noise Rej HF Reject Holdoff
Edge Normal DC Off Off 60ns
Trigger Source Slope Level
Edge Ch 1 Either +500mV
Time Zoom Time Ref Main s/div Delay
Normal Off Center 100.0us/ 100.0us
Acquisition Realtime Vectors Inf Persist
High Res On On Off
Segmented Current Seg Actual # Segs Requested # Segs Sample Rate
On 1 19 19 100MSa/s
The data from channel 1 which is voltage in is recorded in a .csv file, please click here.
The data from channel 2 which is voltage out is recorded in a .csv file, please click here.
